IT認定試験を受験する予定があるあなたにヘルプを与える

NO.1 You have a datacenter that contains six servers. Each server has the Hyper-V server role
installed and runs Windows Server 2012 R2. The servers are configured as shown in the following
table.
Host4 and Host5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1.
You need to move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1.
To which server and by which method should you move VM1?
A. To Host3 by using a storage migration
B. To Host6 by using a storage migration
C. To Host2 by using a live migration
D. To Host1 by using a quick migration
Answer: A

Microsoft試験対策   070-412学習資料   070-412合格   070-412過去問   070-412関連資料
Explanation:
With Hyper-V live migration, you can move running VMs from one Hyper-V physical host to
another without any disruption of service or perceived downtime.
Incorrect:
Not A, not C: The migration of a virtual machine between physical computers is only
supported on computers that have the same processor steppings or are from the same
vendor. Therefore you cannot move a virtual machine from a Hyper-V host on an Intel-
based server to a Hyper-V Host on an AMD-based server.
Not D: Quick Migration saves, moves and restores VMs, which results in some downtime.
Ref: Hyper-V Migration Guide
http://technet.microsoft.com/en-us/library/ee849855(v=WS.10).aspx
Ref: Virtual Machine Storage Migration Overview http://technet.microsoft.com/en-
us/library/hh831656.aspx
Ref: Windows Server 2008 R2 & Microsoft Hyper-V Server 2008 R2 - Hyper-V Live Migration Overview
& Architecture (http://www.microsoft.com/enus/download/details.aspx?id=12601)

NO.2 Your network contains an Active Directory domain named contoso.com.
The domain contains two member servers named Server1 and Server2.
All servers run Windows Server 2012 R2.
Server1 and Server2 have the Failover Clustering feature installed.
The servers are configured as nodes in a failover cluster named Cluster1.
Cluster1 hosts an Application named App1.
You need to ensure that Server2 handles all of the client requests to the cluster for App1. The
solution must ensure that if Server2 fails, Server1 becomes the active node for App1.
What should you configure?
A. Affinity-None
B. Affinity-Single
C. The cluster quorum settings
D. The failover settings
E. A file server for general use
F. The Handling priority
G. The host priority
H. Live migration
I. The possible owner
J. The preferred owner
K. Quick migration
L. the Scale-Out File Server
Answer: J

Microsoft   070-412技術試験   070-412   070-412全真問題集   070-412サンプル
Explanation:
The preferred owner in a 2 server cluster will always be the active node unless it is down.
Reference: Preferred Owners in a Cluster
http://blogs.msdn.com/b/clustering/archive/2008/10/14/9000092.aspx

NO.3 Your network contains an Active Directory forest named adatum.com. The forest contains an
Active Directory Rights Management Services (AD RMS) cluster.
A partner company has an Active Directory forest named litwareinc.com. The partner company does
not have AD RMS deployed.
You need to ensure that users in litwareinc.com can consume rights-protected content from
adatum.com.
Which type of trust policy should you create?
A. At federated trust
B. A trusted user domain
C. A trusted publishing domain
D. Windows Live ID
Answer: A

Microsoft番号   070-412成果物   070-412参考書   070-412フリーク   070-412認定デベロッパー
Explanation:
In AD RMS rights can be assigned to users who have a federated trust with Active Directory
Federation Services (AD FS). This enables an organization to share access to rights-protected content
with another organization without having to establish a separate Active Directory trust or Active
Directory Rights Management Services (AD RMS) infrastructure.
Reference: AD RMS and AD FS Considerations
http://technet.microsoft.com/en-us/library/dd772651(v=WS.10).aspx

NO.4 Your network contains an Active Directory domain named contoso.com. The domain contains
two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 is a file server
that has the Hyper-V server role installed.
Server1 hosts several virtual machines. The virtual machine configuration files are stored on drive D
and the VHD files are stored on drive E.
You plan to replace drive E with a larger volume.
You need to ensure that the virtual machines on Server1 remain available while drive E is being
replaced.
What should you do?
A. Perform a quick migration.
B. Add Server1 and Server2 as nodes in a failover cluster.
C. Perform a live migration.
D. Perform a storage migration.
Answer: D

Microsoft   070-412試合   070-412教育
Explanation:
Hyper-V in Windows Server 2012 R2 introduces support for moving virtual machine storage without
downtime by making it possible to move the storage while the virtual machine remains running.
Reference: Virtual Machine Storage Migration Overview
http://technet.microsoft.com/en-us/library/hh831656.aspx

NO.5 Your company recently deployed a new Active Directory forest named contoso.com. The
forest contains two Active Directory sites named Site1 and Site2. The first domain controller in the
forest runs Windows Server 2012 R2.
You need to force the replication of the SYSVOL folder from Site1 to Site2.
Which tool should you use?
A. Active Directory Sites and Services
B. DFS Management
C. Repadmin
D. Dfsrdiag
Answer: D

Microsoft認証試験   070-412特典   070-412組織   070-412   070-412必要性
Explanation:
In Windows Server 2012 R2, Windows Server 2008 R2, or Windows Server 2008, you can force
replication immediately by using DFS Management, as described in Edit Replication Schedules. You
can also force replication by using the Dfsrdiag SyncNow command. You can force polling by using the
Dfsrdiag PollAD command.
Reference: DFS Replication: Frequently Asked Questions (FAQ)
http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_072

NO.6 Your network contains an Active Directory domain named contoso.com. The domain contains
two member servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers
have the Hyper-V server role installed.
The network contains an enterprise certification authority (CA). All servers are enrolled automatically
for a certificate-based on the Computer certificate template.
On Server1, you have a virtual machine named VM1. VM1 is replicated to Server2.
You need to encrypt the replication of VM1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. On Server1, modify the Hyper-V Settings.
B. On Server2, modify the settings of VM1.
C. On Server2, modify the Hyper-V Settings.
D. On Server1, modify the settings of VM1.
E. On Server1, modify the settings of the virtual switch to which VM1 is connected.
F. On Server2, modify the settings of the virtual switch to which VM1 is connected.
Answer: B,C

Microsoft試験   070-412研修   070-412学習   070-412赤本

NO.7 Your network contains an Active Directory domain named contoso.com. The domain contains
two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as
nodes in a failover cluster named Cluster1.
You add two additional nodes in Cluster1.
You have a folder named Folder1 on Server1 that hosts Application data. Folder1 is a folder target in
a Distributed File System (DFS) namespace.
You need to provide highly available access to Folder1. The solution must support DFS Replication to
Folder1.
What should you configure?
A. Affinity-None
B. Affinity-Single
C. The cluster quorum settings
D. The failover settings
E. A file server for general use
F. The Handling priority
G. The host priority
H. Live migration
I. The possible owner
J. The preferred owner
K. Quick migration
L. The Scale-Out File Server
Answer: E

Microsoft対応受験   070-412試合   070-412受験   070-412返金   070-412勉強方法
Explanation:
File Server for general use Note: You can deploy and configure a clustered file server by using either
of the following methods:
*File Server for general use This is the continuation of the clustered file server that has been
supported in Windows Server since the introduction of Failover Clustering. This type of clustered file
server, and therefore all the shares associated with the clustered file server, is online on one node at
a time. This is sometimes referred to as active-passive or dual-active. File shares associated with this
type of clustered file server are called clustered file shares. This is the recommended file server type
when deploying information worker scenarios.
*Scale-Out File Server for application data This clustered file server feature was introduced in
Windows Server 2012, and it lets you store server application data, such as Hyper-V virtual machine
files, on file shares, and obtain a similar level of reliability, availability, manageability, and high
performance that you would expect from a storage area network. All file shares are simultaneously
online on all nodes. File shares associated with this type of clustered file server are called scale-out
file shares. This is sometimes referred to as active-active. This is the recommended file server type
when deploying either Hyper-V over Server Message Block (SMB) or Microsoft SQL Server over SMB.
Scale-Out File Server for Application Data Overview

NO.8 You have a server named Server1 that runs Windows Server 2012 R2.
You modify the properties of a system driver and you restart Server1.
You discover that Server1 continuously restarts without starting Windows Server 2012 R2.
You need to start Windows Server 2012 R2 on Server1 in the least amount of time. The
solution must minimize the amount of data loss.
Which Advanced Boot Option should you select?
A. Repair Your Computer
B. Last Known Good Configuration (advanced)
C. Disable Driver Signature Enforcement
D. Disable automatic restart on system failure
Answer: B

Microsoftトレーニング   070-412ガイド   070-412改訂   070-412指導
Explanation:
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last
time you turned on the computer.
Reference: Using Last Known Good Configuration

弊社のMicrosoftの070-412勉強資料を利用したら、きっと試験を受けるための時間とお金を節約できます。Pass4TestのMicrosoftの070-412問題集を買う前に、一部の問題と解答を無料にダウンロードすることができます。PDFのバージョンとソフトウェアのバージョンがありますから、ソフトウェアのバージョンを必要としたら、弊社のカスタマーサービススタッフから取得してください。

Pass4TestにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってMicrosoft 070-412認証試験に参加する方に対して問題集を研究続けています。君が後悔しないようにもっと少ないお金を使って大きな良い成果を取得するためにPass4Testを選択してください。Pass4Testはまた一年間に無料なサービスを更新いたします。

Microsoftの070-412は専門知識と情報技術の検査として認証試験で、Pass4Testはあなたに一日早くMicrosoftの認証試験に合格させて、多くの人が大量の時間とエネルギーを費やしても無駄になりました。Pass4Testにその問題が心配でなく、わずか20時間と少ないお金をを使って楽に試験に合格することができます。Pass4Testは君に対して特別の訓練を提供しています。

天帝様は公平ですから、人間としての一人一人は完璧ではないです。私のように、以前が努力しなかったので、今は無駄に悩んでいます。現在のIT領域で競争が激しくなっていることは皆は良く知っていますから、みんなはIT認証を通じて自分の価値を高めたいです。私もそう思いますが、IT認証は私にとって大変難しいです。でも、幸い私はインターネットでPass4TestのMicrosoftの070-412試験トレーニング資料を見つけました。それを手に入れてから私は試験に合格する自信を持つようになります。Pass4TestのMicrosoftの070-412試験トレーニング資料のカバー率がとても高いですから、自分で勉強するよりずっと効率が高いです。あなたもIT業種の一人としたら、ためらわずにPass4TestのMicrosoftの070-412試験トレーニング資料をショッピングカートに入れましょう。Pass4Testはきっとあなたが成功への良いアシスタントになります。

ショートカットを選択し、テクニックを使用するのはより良く成功できるからです。070-412認定試験に一発合格できる保障を得たいなら、Pass4Test の070-412問題集はあなたにとってユニークな、しかも最良の選択です。これは賞賛の声を禁じえない参考書です。この問題集より優秀な試験参考書を見つけることができません。この070-412問題集では、あなたが試験の出題範囲をより正確に理解することができ、よりよく試験に関連する知識を習得することができます。そして、もし試験の準備をするが足りないとしたら、070-412問題集に出る問題と回答を全部覚えたらいいです。この問題集には実際の070-412試験問題のすべてが含まれていますから、それだけでも試験に受かることができます。

たくさんの人はMicrosoft 070-412「Configuring Advanced Windows Server 2012 Services」認証試験を通ることが難しいと思います。もし弊社の問題集を勉強してそれは簡単になります。弊社はオンラインサービスとアフターサービスとオンラインなどの全面方面を含めてます。オンラインサービスは研究資料模擬练習問題などで、アフターサービスはPass4Testが最新の認定問題だけでなく、絶えずに問題集を更新しています。

Pass4TestのMicrosoftの070-412試験トレーニング資料を手に入れたら、あなたは試験に準備するからの悩みや不安を消えてしまうことができます。Pass4TestのMicrosoftの070-412試験トレーニング資料は現在、市場上で一番質のいい学習教材です。それを使って、Microsoftの070-412認定試験に合格する率は１００パーセントになっています。Pass4Testを選び、成功を選ぶのに等しいです。

試験番号：070-412
試験科目：「Configuring Advanced Windows Server 2012 Services」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2015-07-08
問題と解答：全218問 070-412 トレーニング費用

>>070-412 トレーニング費用

Pass4Testは最新のE20-329試験問題集と高品質の500-280認定試験の問題と回答を提供します。Pass4Testの220-010 VCEテストエンジンとHP0-Y46試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の1Z0-536トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク：http://blog.vmware-certified-professional.com/?p=16312